Häner Kegelspalter HKS180 mit Drillkegel ohne Aufnahme log splitter for sale by auction
≈ GHS 3,733
Olpe
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
€360
≈ $414.40
≈ GHS 4,266
Germany, Olpe
Max. torque: 1878 Nm
Operating pressure: 100-170 bar
Oil flow: 50-95 l/min
Revolutions/min: 32-97
Wood diameter: 500 mm (max)
Drive shaft: 50 mm (round)
Dimensions: 230x260x845 mm
Cone diameter: 200 mm
Cone tip replaceable
without pick-up
Max. Drehmoment: 1878 Nm
Betriebsdruck: 100-170 bar
Öldurchfluss: 50-95 l/min
Umdrehungen/Min: 32-97
Holzdurchmesser: 500 mm (max)
Antriebswelle: 50 mm (rund)
Abmessungen: 230x260x845 mm
Kegeldurchmesser: 200 mm
Kegelspitze austauschbar
ohne Aufnahme
Gewichtsklasse: 3-7 t
Max. Drehmoment: 1878 Nm
Betriebsdruck: 100-170 bar
Öldurchfluss: 50-95 l/min
Umdrehungen/Min: 32-97
Holzdurchmesser: 500 mm (max)
Antriebswelle: 50 mm (rund)
Abmessungen: 230x260x845 mm
Kegeldurchmesser: 200 mm
Kegelspitze austauschbar
ohne Aufnahme
Par máx.: 1878 Nm
Presión de servicio: 100-170 bar
Caudal de aceite: 50-95 l/min
Revoluciones/min: 32-97
Diámetro de la madera: 500 mm (
máx)Eje de transmisión: 50 mm (redondo)
Dimensiones: 230x260x845 mm
Diámetro del cono: 200 mm
Punta del cono reemplazable
sin recogida
Suurin vääntömomentti: 1878 Nm
Käyttöpaine: 100-170 bar
Öljyn virtaus: 50-95 l/min
Kierrokset/min: 32-97
Puun halkaisija: 500 mm (max)
Vetoakseli: 50 mm (pyöreä)
Mitat: 230x260x845 mm
Kartion halkaisija: 200 mm
Kartion kärki vaihdettavissa
ilman poimintaa
Couple max. : 1878 Nm
Pression de service : 100-170 bar
Débit d’huile : 50-95 l/min
Tours/min : 32-97
Diamètre du bois : 500 mm (max)
Arbre de transmission : 50 mm (rond)
Dimensions : 230x260x845 mm
Diamètre du cône : 200 mm
Pointe du cône remplaçable
sans ramassage
Coppia massima: 1878 Nm
Pressione di esercizio: 100-170 bar
Flusso d'olio: 50-95 l/min
Giri/min: 32-97
Diametro legno: 500 mm (max)
Albero motore: 50 mm (rotondo)
Dimensioni: 230x260x845 mm
Diametro cono: 200 mm
Punta conica sostituibile
senza pick-up
Max. koppel: 1878 Nm
Werkdruk: 100-170 bar
Oliestroom: 50-95 l/min
Omwentelingen/min: 32-97
Houtdiameter: 500 mm (max)
Aandrijfas: 50 mm (rond)
Afmetingen: 230x260x845 mm
Kegeldiameter: 200 mm
Kegelpunt vervangbaar
zonder pick-up
Max. moment obrotowy: 1878 Nm
Ciśnienie robocze: 100-170 bar
Przepływ oleju: 50-95 l/min
Obroty/min: 32-97
Średnica drewna: 500 mm (max)
Wał napędowy: 50 mm (okrągły)
Wymiary: 230x260x845 mm
Średnica stożka: 200 mm
Końcówka stożkowa wymienna
bez podbieracza
Cuplu maxim: 1878 Nm
Presiune de funcționare: 100-170 bar
Debit de ulei: 50-95 l/min
Roții/min: 32-97
Diametru lemn: 500 mm (max)
Arbore de transmisie: 50 mm (rotund)
Dimensiuni: 230x260x845 mm
Diametru con: 200 mm
Vârf conic înlocuibil
fără pick-up
Max. vridmoment: 1878 Nm
Arbetstryck: 100-170 bar
Oljeflöde: 50-95 l/min
Varv/min: 32-97
Trädiameter: 500 mm (max)
Drivaxel: 50 mm (rund)
Mått: 230x260x845 mm
Kondiameter: 200 mm
Konspets utbytbar
utan pick-up